Avaya 31860X real dump : Avaya IX™ Calling Design Exam

Which change was made to EC500, to provide CS1000 Mobile-X like feature experience?

• A. You can now put the call on hold before dialing a feature access code.
• B. You must now enter feature access codes before you put a call on hold.
• C. You can now enter a feature access code before receiving a call.
• D. You can now dial a feature access code without putting the call on hold.

You are designing a Communication Manager (CM) 8 solution with centralized ISDN trunks at the main site and two remote gateway locations. Each remote location will be connected to the main server via dedicated, point-to-point WAN service. Main - CM 8.1 duplex pair with 2-G450s and 250 IP stations Remote 1 - S8300E LSP/G450 with 125 IP stations Remote 2 - S8300E LSP/G430 with 30 IP stations.
To ensure that no one site Is overwhelmed by CM traffic, what is the recommended number of network regions required for this design?

• A. 7 regions: 1 at the main, 1 at each remote site, 1 for each site's IP telephones, and one for the virtual network region
• B. 4 regions: 1 at the main, 1 at each remote site, and 1 for the virtual network region
• C. 3 regions: 1 at the main, and 1 at each remote site
• D. 6 regions: 1 at the main, 1 at each remote site, and 1 virtual network region for each site

To meet a customer's requirements, you have determined that the proposed solution will have the following components:
* Location A will have a Communication Manager with a G450 Media Gateway supporting 600 users.
* Location B will have a G450 Media Gateway supporting 250 users supported by the Communication Manager at Location A.
The customer requires ISDN-PRI Tl1trunking at each location that is based on a five users per trunk sizing model.
Given these requirements, what is the minimum number of Tis per location?

• A. Location A requires 6 T1s, Location B requires 3 T1s
• B. Location A requires 5 T1s, Location B requires 1 T1
• C. Location A requires 4 T1s, Location B requires 2 T1
• D. Location A requires 4 T1s, Location B requires 2 T1s

You are helping a new Sales Engineer learn about Avaya Aura survivability. If a branch that has only SIP devices and has deployed a Survivable Remote Communication Manager and Session Manager, the engineer wants to know what happens when the connection to the Avaya Aura core is down.
What are two things you would tell the engineer? (Choose two.)

• A. The Survivable Remote Communication Manager provides feature functionality.
• B. SIP telephones fail-over to the Survivable Remote Session Manager.
• C. The local SIP device cache provides feature functionality.
• D. The Core Communication Manager provides feature functionality.

You are designing media gateways at remote locations for a customer. They have requested the following:
* Analog telephone calls go through the PSTN in case of power outage.
* Redundant power supply
* The same administrative and telephone functionality during WAN outage Which design meets these customer requests?

• A. A design with G450 gateways with dual power supplies, and Standard Local Survivability A design with G430 gateways with dual power supplies, and Standard Local Survivability
• B. A design with G450 gateways with dual power supplies, and S8300 Survivable-Remote
• C. A design with G430 gateways with dual power supply, and S8300 Survivable-Remote