Fortinet NSE6_FNC-9.1 Exam Dumps [2024] Practice Valid Exam Dumps Question
NSE6_FNC-9.1 Dumps - Grab Out For [NEW-2024] Fortinet Exam
Fortinet NSE6_FNC-9.1 (Fortinet NSE 6 - FortiNAC 9.1) certification exam is a highly sought-after certification for IT professionals who are interested in network security. Fortinet NSE 6 - FortiNAC 9.1 certification exam is designed to validate the knowledge and skills of candidates in configuring, managing, and troubleshooting FortiNAC solutions. Fortinet NSE 6 - FortiNAC 9.1 certification is recognized globally and demonstrates that the certified professionals have a comprehensive understanding of network access control.
Fortinet NSE6_FNC-9.1 exam is a specialized certification exam that covers the latest technology that provides network access control to secure networks. NSE6_FNC-9.1 exam is designed to ensure that network security professionals have a thorough understanding of how FortiNAC 9.1 works and how to configure it to meet specific security needs. The Fortinet NSE6_FNC-9.1 exam is a highly sought-after certification that helps IT professionals stand out in the professional environment.
The FortiNAC solution is a network access control solution from Fortinet that enables organizations to secure their network infrastructure by controlling and monitoring access to network resources. The Fortinet NSE6_FNC-9.1 certification exam focuses on testing the candidate's understanding of how FortiNAC works, how to deploy it, and how to manage it effectively. NSE6_FNC-9.1 exam covers a wide range of topics, including FortiNAC architecture, policies, enforcement, authentication, and auditing. Passing the certification exam is an indication of the candidate's proficiency in FortiNAC's advanced features and functionalities.
NEW QUESTION # 13
Refer to the exhibit.
If you are forcing the registration of unknown (rogue) hosts, and an unknown (rogue) host connects to a port on the switch, what occurs?
- A. The host is moved to VLAN 111.
- B. No VLAN change is performed.
- C. The host is moved to a default isolation VLAN.
- D. The host is disabled.
Answer: C
NEW QUESTION # 14
View the command and output shown in the exhibit.
What is the current state of this host?
- A. Rogue
- B. At-Risk
- C. Not authenticated
- D. Registered
Answer: C
NEW QUESTION # 15
During the on-boarding process through the captive portal, what are two reasons why a host that successfully registered would remain stuck in the Registration VLAN? (Choose two.)
- A. Bridging is enabled on the host.
- B. The port default VLAN is the same as the Registration VLAN.
- C. There is another unregistered host on the same port.
- D. The wrong agent is installed.
Answer: B,C
NEW QUESTION # 16
Refer to the exhibit.
What would happen if the highlighted port with connected hosts was placed in both the Forced Registration and Forced Remediation port groups?
- A. Both types of enforcement would be applied.
- B. Only the higher ranked enforcement group would be applied.
- C. Multiple enforcement groups could not contain the same port.
- D. Enforcement would be applied only to rogue hosts.
Answer: A
NEW QUESTION # 17
Which two methods can be used to gather a list of installed applications and application details from a host?
(Choose two.)
- A. MDM integration
- B. Agent technology
- C. Portal page on-boarding options
- D. Application layer traffic inspection
Answer: A,B
NEW QUESTION # 18
Which connecting endpoints are evaluated against all enabled device profiling rules?
- A. Rogues devices, each time they connect
- B. Known trusted devices each time they change location
- C. Rogues devices, only when they connect for the first time
- D. All hosts, each time they connect
Answer: A
Explanation:
Explanation
FortiNAC process to classify rogue devices and create an organized inventory of known trusted registered devices.
NEW QUESTION # 19
Which two things must be done to allow FortiNAC to process incoming syslog messages from an unknown vendor? (Choose two.)
- A. The device must be added as a log receiver.
- B. The device sending the messages must be modeled in the Network Inventory view.
- C. The device must be added as a patch management server.
- D. A security event parser must be created for the device.
Answer: A,D
NEW QUESTION # 20
Which command line shell and scripting language does FortiNAC use for WinRM?
- A. Powershell
- B. Linux
- C. Bash
- D. DOS
Answer: A
Explanation:
Explanation
Open Windows PowerShell or a command prompt. Run the following command to determine if you already have WinRM over HTTPS configured.
NEW QUESTION # 21
By default, if more than 20 hosts are seen connected on a single port simultaneously, what will happen to the port?
- A. The port is added to the Forced Registration group.
- B. The port is disabled.
- C. The port is switched into the Dead-End VLAN.
- D. The port becomes a threshold uplink.
Answer: D
Explanation:
Explanation
Admin Guide p. 754: Threshold Uplink-The Uplink mode has been set as Dynamic and FortiNAC has determined that the number of MAC addresses on the port exceeds the System Defined Uplink count. All hosts read on this port are ignored.
NEW QUESTION # 22
Which group type can have members added directly from the FortiNAC Control Manager?
- A. Port
- B. Administrator
- C. Device
- D. Host
Answer: B
NEW QUESTION # 23
Which three circumstances trigger Layer 2 polling of infrastructure devices? (Choose three.)
- A. Manual polling
- B. Linkup and Linkdown traps
- C. A matched security policy
- D. Scheduled poll timings
- E. A failed Layer 3 poll
Answer: A,B,D
NEW QUESTION # 24
While troubleshooting a network connectivity issue, an administrator determines that a device was being automatically provisioned to an incorrect VLAN.
Where would the administrator look to determine when and why FortiNAC made the network access change?
- A. The Port Changes view
- B. The Connections view
- C. The Admin Auditing view
- D. The Event view
Answer: A
NEW QUESTION # 25
What would occur if both an unknown (rogue) device and a known (trusted) device simultaneously appeared on a port that is a member of the Forced Registration port group?
- A. The port would not be managed, and an event would be generated.
- B. The port would be provisioned to the registration network, and both hosts would be isolated.
- C. The port would be provisioned for the normal state host, and both hosts would have access to that VLAN.
- D. The port would be administratively shut down.
Answer: B
NEW QUESTION # 26
Which three communication methods are used by FortiNAC to gather information from and control, infrastructure devices? (Choose three.)
- A. RADIUS
- B. CLI
- C. SNMP
- D. SMTP
- E. FTP
Answer: A,B,C
Explanation:
Explanation
FortiNAC Study Guide 7.2 | Page 11
NEW QUESTION # 27
What agent is required in order to detect an added USB drive?
- A. Dissolvable
- B. Persistent
- C. Mobile
- D. Passive
Answer: B
Explanation:
Explanation
Expand the Persistent Agent folder. Select USB Detection from the tree.
NEW QUESTION # 28
In which view would you find who made modifications to a Group?
- A. The Security Events view
- B. The Alarms view
- C. The Admin Auditing view
- D. The Event Management view
Answer: C
Explanation:
Explanation
It's important to audit Group Policy changes in order to determine the details of changes made to Group Policies by delegated users.
NEW QUESTION # 29
What would happen if a port was placed in both the Forced Registration and the Forced Remediation port groups?
- A. Both enforcement groups cannot contain the same port.
- B. Both types of enforcement would be applied.
- C. Only rogue hosts would be impacted.
- D. Only al-risk hosts would be impacted.
Answer: A
NEW QUESTION # 30
Which three communication methods are used by FortiNAC to gather information from and control, infrastructure devices? (Choose three.)
- A. RADIUS
- B. CLI
- C. SNMP
- D. SMTP
- E. FTP
Answer: A,B,C
Explanation:
Explanation
FortiNAC Study Guide 7.2 | Page 11
NEW QUESTION # 31
View the command and output.
What is the state of database replication?
- A. Secondary to primary synchronization failed.
- B. Primary to secondary database synchronization was successful.
- C. Secondary to primary synchronization was successful.
- D. Primary to secondary synchronization failed.
Answer: B
NEW QUESTION # 32
......
NSE6_FNC-9.1 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions: https://passleader.free4dump.com/NSE6_FNC-9.1-real-dump.html