Use the best ways of preparing for 1Z0-1048-20 Exam Dumps with Free4Dump Oracle 1Z0-1048-20 dump PDF [2022]
Oracle 1Z0-1048-20 exam candidates will surely pass the Exam if they consider the 1Z0-1048-20 dumps learning material presented by Free4Dump.
NEW QUESTION 34
Which process enables you to quickly identify large quantities of time cards to submit and mark as approved, at one time?
- A. Mass Submit and Approve Time cards Process
- B. Mass Submit Time Cards Process
- C. Mass Approve Time Cards Process
- D. Mass Time Cards Status Update Process
Answer: A
NEW QUESTION 35
How should you configure Time and Labor Approvals to route to multiple approvers so that if a Payroll Layout time card only contains regular hours, it routes to the Line Manager, but if the time card contains an absence, it can also route to an HR admin?
- A. You should use the BPM Worklist and modify the Payroll Time Card Approval - > BPM task:
TimecardApproval and BPM Worklist, and modify the BPM task: AbsencesApprovalsTask. - B. You should use the BPM Worklist and modify the BPM task: AbsencesApprovalsTask.
- C. You should use the BPM Worklist and modify the Project Time Card Approval - > BPM task:
ProjectTimecardApproval. - D. You should use the BPM Worklist and modify the Payroll Time Card Approval - > BPM task:
TimecardApproval. - E. This is not possible.
Answer: A
NEW QUESTION 36
The HCM Groups you have created need to be refreshed nightly to update the group members based on employment changes.
What steps must you configure in order to include the group in the refresh process?
- A. The Evaluate HCM Group Membership can only be configured to run for one group at a time, so you must setup a recurrence for each group to refresh separately nightly.
- B. Schedule the "Evaluate HCM Group Membership" process to run nightly.
- C. When configuring the HCM Group, you must select the "include in Refresh All Group Process" and then the group will automatically refresh nightly.
- D. When Configuring the HCM Group, you must select the "Include in Refresh All Group process" checkbox, and then schedule the "Evaluate HCM Group Membership" process to run nightly.
Answer: D
NEW QUESTION 37
You have 10 different Legislative Data Groups (LDG) defined. Each LDG has a different set of Payroll Time Types and Absence Types.
How should you configure a Layout Component to display the proper values in one single list on the Time Entry Layout?
- A. Create a Multiple Attribute Time Card Field, filtering the list using Element Eligibility.
- B. Cannot be done in one list. This requires two separate selection lists (Time Card fields), placed on the Time Entry Layout.
- C. Create a Multiple Attribute Time Card field, filtering the displayed values based on the LDG Filtering function.
- D. Create a Multiple Attribute Time Card Field, filtering the list using Assignment ID.
Answer: C
NEW QUESTION 38
When should you execute the Time and Labor - Generate Data Dictionary Time Attributes process if you are implementing only Oracle Project Costing?
- A. Every day
- B. Never; not required to run the Generate Data Dictionary Time Attributes process when implementing Oracle Project Costing
- C. When implementing Time and Labor for the first time
- D. When new projects and tasks are created for use in Time and Labor
- E. Always before accessing the Manage Time Entry Layout Components setup task
Answer: D
Explanation:
Explanation
Reference https://docs.oracle.com/cloud/farel12/globalcs_gs/FAITL/FAITL1657304.htm#FAITL1657304
NEW QUESTION 39
Your customer has asked you to define a weekly time card period and a bi-weekly approval period. How should you configure this?
- A. You define a weekly repeating period to be used for time cards and approvals and specify that the approval period should occur every two weeks.
- B. You cannot define a time card period that is different from the approval period.
- C. You define a weekly repeating period for use with time cards and a bi-weekly repeating period for use with approvals.
- D. You define a bi-weekly repeating period to be used for time cards and approvals and specify that approvals should occur mid period.
Answer: B
Explanation:
Explanation
Reference https://docs.oracle.com/cd/E48434_01/fusionapps.1118/e49577/F1192634AN70F32.htm
NEW QUESTION 40
Which statement is true about the way the planned schedule is defaulted?
- A. It is always defaulted with the workers' standard working hours.
- B. It is defaulted with the workers' availability.
- C. All three of the above options are true.
- D. It is always defaulted with the workers' work schedules.
Answer: B
NEW QUESTION 41
How should you remove email notifications from the Time card Workflow if it has been set up for auto approvals?
- A. Go into BPM, remove each individual from the approval email notification list.
- B. Go into BPM, edit the TimecardApproval task and the TimecardApprovalFYI task, and remove the notification sent to Assignee when task is completed and/or in Error.
- C. Go into BPM, and select the "no email notifications" check box on the TimecardApproval task.
- D. This is not possible.
Answer: C
NEW QUESTION 42
Which delivered Role, Workarea, and Task combinations should be used when troubleshooting rule processing issues to determine which rules and rule sets are executed against a specific worker's time card for a specific time card action?
- A. Time and Labor Manager, Setup and Maintenance Work Area, Analyze Rule Processing Details Task
- B. Time and Labor Manager, Time Management Work Area, Analyze Rule Processing Details Task
- C. Time and Labor Manager, Time Management Work Area, Manage Time Repository Rule Sets
- D. Time and Labor Administrator, Time Management Work Area, Analyze Rule Processing Details Task
- E. Time and Labor Administrator, Setup and Maintenance Work Area, Analyze Rule Processing Details Task
- F. Time and Labor Administrator, Setup and Maintenance Work Area, Manage Worker Time Processing Profile Task
Answer: F
NEW QUESTION 43
What is the correct sequence of steps and new defined objects required to enable customer-defined messages as an option when defining different time card validation rules?
- A. Define a new message as WFM_<message name>, select the new message when defining a TER rule, and assign the rule using a rule set and time processing profile.
- B. Define new messages as HWM_<message name>, select the new messages when defining a TER rule, and assign the rule using a rule set and time processing profile.
- C. Define a new Message as CUST_HWM_<message name>, select the new messages when defining a TER rule, and assign the rule using a rule set and time processing profile.
- D. Define new messaged as CUST_HWM_<message name>, select the new messages when defining a TDR or TER rule, and assign the rule using a rule set and time processing profile.
Answer: C
NEW QUESTION 44
Your client wants to minimize the validation rules that execute against a time card and only under certain circumstances they want certain validation rules, if required, to display validation messages.
Which option will accomplish your customer's goals?
- A. Create a formula that incorporates program logic to check for certain time card entries and, when present, execute the validation rule. Create the new template and rule. Place the rule that uses the formula in a rule set and assign the rule set using an appropriate profile.
- B. Create a new formula/template and rule that uses an input parameter to check for certain values defined in the rule using a time category input parameter. When present, complete execution of the rule. Place the rule that uses the formula in a rule set and assign the rule set using an appropriate profile.
- C. Place the validation rules in a rule set, assigning a properly formatted time category on the same rows in the rule set. Assign the rule set to the workers using an appropriate profile.
- D. Create a new validation formula/template and rule that accesses HCM data to only execute if certain HR data exists for the worker and processes the validation logic on the time entries. Place the rule that uses the formula in a rule set and assign the rule set using an appropriate profile.
Answer: C
NEW QUESTION 45
A customer requirement is to use the first part (week) of a biweekly time card period for validation purposes.
Which option outlines how this could be accomplished?
- A. Create a new rule template using a delivered TER formula. Enable input parameters in the template to define the validation period and set the summation period to "Day Level." Create rules using the new rule template and assign them using a rule set.
- B. Create a new rule template using a delivered TER formula. Enable input parameters in the template to define the validation period and set summation period to "Time Card Level." Create rules using the new rule template and assign them using a rule set.
- C. Create a new TER formula and rule templates. Define the validation period within the formula. Enable the summation level selection when defining the rule as an input parameter within the rule templates.
Create rules using the new rule templates and assign them using a rule set. Place the "Day Level" rules on Rows 1-7 for days 1-7 in the time card period, and the "Time Card Level" Rule in the 8th row. Use the Processing Sequence to order the rules. - D. Create a new TER formula and rule template. Define the validation period within the formula. Set the summation period to "Time Card Level" in the rule template and enable the input parameters. Create rules using the new rule template and assign them using a rule set.
Answer: C
NEW QUESTION 46
How should you enable population of the Supplier Device Event list of values in mappings?
- A. By defining the values in the TCD Supplier Events lookup only
- B. By defining a value set to list the supplier events
- C. By doing nothing. The list of events is defaulted with one In event and one Out event.
- D. By defining the value of the supplier in the TCD suppliers lookup first, and then the values of the supplier events in the TCD Supplier Events lookup
Answer: D
Explanation:
Explanation
Reference
https://docs.oracle.com/en/cloud/saas/global-human-resources/r13-update17d/faitl/time-collection-device-config
NEW QUESTION 47
What are the three possible types of time allocation?
- A. Percentage, Number, and Proportionally
- B. Hours, Percentage, and Equally
- C. Hours, Week, and Bi-Weekly
- D. Hours, Time Card Period, and Percentage
Answer: B
Explanation:
Explanation
Reference
https://docs.oracle.com/en/cloud/saas/global-human-resources/r13-update18a/faitl/rule-based-validation-calculat
NEW QUESTION 48
You need to create an HCM group of workers that have the same value stored in their People Group field.
How should you define the HCM group?
- A. Select a People Group from the list of Additional Employment Attributes in the Group Eligibility section.
- B. Define a customer-defined value set and select from the Include Group section on the page.
- C. Select a delivered value set in the Group Eligibility section.
- D. This cannot be done.
- E. Select a specific People Group Segment in the Group Eligibility section on the page,
Answer: A
NEW QUESTION 49
On a Payroll Time Card, workers enter time against different cost codes, and the customer requires the time card to be routed to the manager of the appropriate cost center or centers.
Which option is correct?
- A. Use the Manage Approval Groups task to define an approval group comprising all Cost Center managers. The Approval Rule will then route to the appropriate Cost Center managers.
- B. Modify the delivered project's approval to route the time card to each Cost Center Manager instead of each Project Manager.
- C. Use the Manage Approval Groups task to define an approval group comprising all Cost Center managers, and use an HCM group in the workers' Time Processing Profile to restrict approvers to only those required for the cost centers used on the time card.
- D. Cost center-based approval cannot be implemented.
Answer: C
NEW QUESTION 50
When selecting delivered formula to use in defining a new template, if two delivered formula accomplish the same results, when must the formula with _AP be selected?
- A. When the formula, template, and rule must process first in the rule set. Formula identified with _AP enables additional processing order logic from within the Time and Labor rule processing engine.
- B. Selecting the formula defined with _AP is not required.
- C. When the rule created with the formula/template must access data outside the current time card data.
- D. When the formula, template, and rule must access the time card data in an advanced sort order to complete correctly.
Answer: C
NEW QUESTION 51
How do you configure a time submission rule set used with time devices?
- A. Manage Time Submission Rule Set and add the submission rules to the set.
- B. Every time you associate a time submission rule with the processing profile, the add action creates a corresponding rule set.
- C. Every time you create a time submission rule, the save action also creates a corresponding rule set.
- D. Use the time device import process to add time submission rules to the rule set.
Answer: B
Explanation:
Explanation
Reference https://docs.oracle.com/cloud/farel12/globalcs_gs/FAITL/FAITL2021781.htm#FAITL1788995
NEW QUESTION 52
You need to configure a Time Card Layout for your customer that includes dependent Payroll Time Type attributes for input values.
What process must you run to create these dependent attributes?
- A. the Load Time Card process
- B. the Generate Time Cards process
- C. the Generate Data Dictionary process
- D. the Time Card Synchronization process
- E. the Time Events process
Answer: C
Explanation:
Explanation
Reference
https://docs.oracle.com/cloud/r13_update17b/globalcs_gs/FAITL/FAITL2508588.htm#FAITL2233368
NEW QUESTION 53
What When executing the Generate Time Card Fields process, that will be setting the parameter "Include Absence Types" to Yes accomplish?
- A. enables entry of Absence Plans directly on the time entry and calendar entry layouts
- B. creates a multiple-attribute time card field with Absence Management type and Payroll Time type time attributes
- C. creates a multiple-attribute time card field with only the Absence Management type time attribute
- D. enables Absence entries on the time entry and calendar entry layouts
- E. updates available absence values for selection within the existing time card fields
- F. none of the above
Answer: D
NEW QUESTION 54
A worker is supposed to report for a morning shift with a scheduled start time of 08:00 AM. In the related shift limits, the grace period is set to 15 minutes and the Start Early period to 60 minutes. The worker punches in at
07:15 AM.
What exception is generated?
- A. Early in time entry
- B. Late in time entry
- C. No exception is generated.
- D. Invalid in time entry
Answer: A
NEW QUESTION 55
......
Accurate & Verified Answers As Seen in the Real Exam here: https://passleader.free4dump.com/1Z0-1048-20-real-dump.html